kjohn2007

I have a 1999 Ford Ranger 4.0 4x4! I had to replace both cylinder heads on my ranger. My question is on the head gasket it says top front on it and I was just wanting to make sure is that the way that its suppose to be facing up?

Diabolical Ranger

if it shows top and front that is the way

__________________
2001 Chrome Yellow 4x4 Edge
4.0L auto, STEPSIDE
mods include: Sohc decals on power dome hood
Blinker mod, OHC, Yellow Ovals, 7-pin trailer plug,
Curt 2" rec. hitch, brake controller wired in dash
UWS Diamond plate toolbox,7" dvd,cd player stereo with remote.cb radio


even the most hardcore, outlaw bad ass has to do what the wife says once in a while

and a word of caution:
reading my post may piss you off at times but hey it's real life, you will recover.

klinger86

top will go up towards the head and front will go towards the nose of the truck.

__________________
1998 Ranger XLT Stepside 2.5 L 5-Speed
3in BL. White speedo guage overlay. 5% tint on all windows.
Currently redoing the interior. Mustang Dome Light Mod. OHC with buggman's led light mod. Bucket seats. Center console... Auto dim mirror... Air box mod.... 01-03 grille conversion...

kjohn2007

Ok thanks I was just wanting to make sure. Its just one of those things I wanted to make sure that was done right were I dint want to have to tear it all back down lol.

Diabolical Ranger

make sure you torque them down right too

__________________
2001 Chrome Yellow 4x4 Edge
4.0L auto, STEPSIDE
mods include: Sohc decals on power dome hood
Blinker mod, OHC, Yellow Ovals, 7-pin trailer plug,
Curt 2" rec. hitch, brake controller wired in dash
UWS Diamond plate toolbox,7" dvd,cd player stereo with remote.cb radio


even the most hardcore, outlaw bad ass has to do what the wife says once in a while

and a word of caution:
reading my post may piss you off at times but hey it's real life, you will recover.

Brinker88

Do NOT use FelPro Head bolts. I had a set fail on me.

__________________


1993 4x4 Ford Ranger Ext. Cab, stepside|4.0L|Lifted | Dana 35 TTB | 4.56s | Disc 8.8 with Aussie Locker |Yakima Roof Rack |35" BFG KM2's on MT Classic IIs |Etc.. | We are the 4x4 % |

Wherever we want to go, we'll go. That's what a truck is, you know. It's not just a frame and a cab and a bed and engine, that's what a truck needs but what a truck is... what the Ranger really is... is freedom.

kjohn2007

Would you have to know what the Torque specs are. The place were i got my heads they are a racing shop and everything the told me the torque specs are:

1 48 lbs
2 60 lbs
3 Then another 85 degree turn.

Brinker88

Haynes said another 90 degrees I believe.

__________________


1993 4x4 Ford Ranger Ext. Cab, stepside|4.0L|Lifted | Dana 35 TTB | 4.56s | Disc 8.8 with Aussie Locker |Yakima Roof Rack |35" BFG KM2's on MT Classic IIs |Etc.. | We are the 4x4 % |

Wherever we want to go, we'll go. That's what a truck is, you know. It's not just a frame and a cab and a bed and engine, that's what a truck needs but what a truck is... what the Ranger really is... is freedom.

klinger86

Torque sequence ------------ | 6 2 4 8 | | 5 3 1 7 | ------------ Step 1: torque in sequence to 48 Ft/Lbs Step 2: torque in sequence to 62 Ft/Lbs Step 3: tighten all bolts in sequence an additional 90 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.

here is the torque specs per autozone.....

__________________
1998 Ranger XLT Stepside 2.5 L 5-Speed
3in BL. White speedo guage overlay. 5% tint on all windows.
Currently redoing the interior. Mustang Dome Light Mod. OHC with buggman's led light mod. Bucket seats. Center console... Auto dim mirror... Air box mod.... 01-03 grille conversion...

Brinker88

http://www.rangerforum.net/f29/chilt...e-manual-2206/

This will give you a step by step with picures.

__________________


1993 4x4 Ford Ranger Ext. Cab, stepside|4.0L|Lifted | Dana 35 TTB | 4.56s | Disc 8.8 with Aussie Locker |Yakima Roof Rack |35" BFG KM2's on MT Classic IIs |Etc.. | We are the 4x4 % |

Wherever we want to go, we'll go. That's what a truck is, you know. It's not just a frame and a cab and a bed and engine, that's what a truck needs but what a truck is... what the Ranger really is... is freedom.