|
|
#1 |
|
Got boost?
|
I nor Rangerforum.net take any responibility to damage you cause to you or your truck or anybody around while performing this.
This is a write up to replace the door glass in a 93-97 ford ranger hand crank style power may be a little bit different but glass is held in the same est. time : 30-60 min. ![]() this may need to be done if yours is chipped or was shattered like mine Tools needed: 4 1/4" rivets 3/8 rachet 11mm 3/8 socket Phillips head screw driver Torx head screw driver Drill 1/4" drill bit Crescent wrench The two handed rivet gun ![]() ![]() ![]() ![]() ![]() Step 1: park somewhere with light and remove the key from the Ignition to keep the door ajar alarm off Step 2: Take off the door panel. 3 screws one on the bottom left hand side in the slits, one on the top right on the triangle piece. the other is in the handle inlet. those take the phillips. Now pop the little cover off you hand crank window lever. then this is the Torx head just unscrew it and pop the whole thing off. Now pull up on the door panel it will slide up and off easily. ![]() Step 3: Remove the door speaker and the dust shield (paper thing covering all the holes) The speaker uses the phillips. Step 4: Pull off the behind the window rubber trim as seen in picture already removed (requires window to be down to make easier) ![]() Step 5: Now unbolt the rear window track and remove (this makes removing easier and installation alot better) this uses the socket and rachet Now You should see this ![]() Step 6: now take the drill and drill out the center of the rivets here Use the crescent wrench to pull the rivets off afterwardsStep 7: Now you should beable to pull the old window out threw the front of window opening Step 8: slide new glass in same way old one came out Step 9: Now line it up and bolt the track back in. Step 10: Line the new window up with the bracket and rivet the new window in like so... ![]() Now Just reinstall everything the way it came off and enjoy your new glass ![]() Hope this is good enough for anyone who needs it
__________________
Colin S. AGE: 18 1994 Ford Ranger XLT 4x4 reg. cab 4.0l 5spd,24# injectors, 80mm MAF, e-fan, 2" SL , Summit Nomads 15x8, 30x9.5x15 Trail Digger M/T's, cab lights, spray in bed liner, custom tube bumper, 4 wheel disc brakes 1994 Ford Ranger XLT 2.3l 5spd ext. cab. the loaner truck 1987 Camaro z28 383 to much to list https://www.facebook.com/colinshriver |
|
|
Join RangerForum.com Today - It's Totally Free! Do you love your truck? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's a great place for Ford Ranger Fans to meet online. |
|
|
#2 |
|
Rangerholic!!
|
Awesome write up!
__________________
2001 XLT Supercab Stepside! 4" Superlift, 3" PA Body lift, 33X12.5X15 Goodyear Wrangler Silent Armor on Mickey Thompson Classics. 08 power side mirrors, 08 fender badges, Hellas behind the grille, Herculined bed, Vent visors, shorty antennae, modified radio bezel with 2 OEM fog switches & custom paint, mustang dome light, Explorer OHC, 03 FX4 silver cluster, Black Edge seats & black rear jump seats, Flowmaster super44, toolbox, headache rack "A man is nothing in this world if he doesn't keep his word" |
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How To: Replace Door glass 93-94 - Discussion thread | ZRanger28 | How-To Submissions | 0 | 01-16-2012 11:42 AM |
| replace exterior door handle 97 Ranger | pwebb | 1993 - 1997 Ford Ranger | 3 | 09-26-2011 09:23 PM |
| Ebay find: Fiber glass front fenders 4in 3 bulge | blkranger231 | Trades & Sales | 3 | 02-10-2011 11:47 PM |
| How To: Remove armrest & upper padding and replace on newer door panels | Hooligan | How-To | 0 | 02-07-2011 08:56 PM |