djfllmn

nope the only fix is replace the parts

__________________

SalRanger2

hope you figure it out dude. hey dont the MOOG ball joints require you to use their control arms or is that just some?

__________________

'99 Ranger XLT Reg. Cab Stepside
2.5L
2WD
5spd
K&N Filter
Air Box Mod
Explorer OHC

Redneck_ranger

I have no clue if that's required. Alright, here's my list of parts to replace....
Ball joints (all)
Upper control arms and bushings
Tie rods (both inner and outer)

Anything else I should change while I'm there?

__________________

joshyddog

You talking about the negative camber?

Redneck_ranger

Well, I totaled it all up and I'm looking at approximately $550 worth of parts, and a few days downtime from the truck. She's waiting until the summer to get it done when I can save up some cash...

__________________

Redneck_ranger

Yessir. Can't stand it. Looks awkward, wears my tires HORRIDLY, and causes the truck to ride like crap.

__________________

joshyddog

That sucks!!! So if i crank my tbars will it do that?

Redneck_ranger

I'm not entirely sure anymore. I swore by it before, but after getting an alignment, and having the two numbers be so far off, I don't think it is from that anymore. I mean, yeah. They'll be cambered somewhat because the upper A-arm is shorter than the bottom, but not this bad. Hooligan has his cranked from what he told me, and he got his aligned for it. They sell adjustable camber kits to fix this too, but I'm not going to add another part if I don't need to.

__________________

nicksranger01

i know with my ranger you cant just change the upper ball joint, it's the entire upper control arm with the bushings that get changed

__________________
01 Ranger XLT off-road 4wd 4.0 auto
Mods: too dang many

92 Ford Mustang 5.0 5spd topless, which makes the girls topless

ZRanger28

with the torsion bar set up, from the factory the upper ball joint is non-replacable without changing the entire upper control arm,

moog sells there upper control arms with a new ball joint and in thier kit it is replaceable.

i know, cause i have a 2000 ranger in my shop right now, im doing ball joints on.

just get the moog and be done with it


wait? so pete u got an alignment just to see the number and didnt have them adjust anything? seems like a waste of time and money bud

__________________
Colin S. AGE: 18
1994 Ford Ranger XLT 4x4 reg. cab 4.0l 5spd,24# injectors, 80mm MAF, e-fan, 2" SL , Summit Nomads 15x8, 30x9.5x15 Trail Digger M/T's, cab lights, spray in bed liner, custom tube bumper,

1994 Ford Ranger XLT 2.3l 5spd ext. cab. the loaner truck

1987 Camaro z28 383 to much to list

https://www.facebook.com/colinshriver