|
|
#1 |
|
Junior Member
Join Date: Aug 2011
Posts: 3
|
I had a carb rebuilt (6 months ago) and now it is running rich, choke stays on too long, and once choke is off, idles down but has like a miss.(original reason I had it rebuilt and as it almost dies)
It doesn't die now but still has a miss (mechanic adjusted it and ran better but that was 4 months ago) getting worse. Took it back to mechanic, but now he tells me that he doesn't really work on older vehicles and to take it somewhere else. Vehicle is a 2.0 with a little over 55,000 original miles on it. 5 speed, no power anything. I looked for cracked hoses but didn't find anything. I have a Chilton book but not following the diagrams that well. What other things should I check. I don't do well with carbs.....
|
|
|
|
Join RangerForum.com Today - It's Totally Free! Do you love your truck? If so we invite you to join our community and see what it has to offer. Our site is specifically designed for you and it's a great place for Ford Ranger Fans to meet online. |
|
|
#2 |
|
Rangerholic!!
|
Have you checked the gasket for a flush fit and seal?
__________________
2001 XLT Supercab Stepside! 4" Superlift, 3" PA Body lift, 33X12.5X15 Goodyear Wrangler Silent Armor on Mickey Thompson Classics. 08 power side mirrors, 08 fender badges, Hellas behind the grille, Herculined bed, Vent visors, shorty antennae, modified radio bezel with 2 OEM fog switches & custom paint, mustang dome light, Explorer OHC, 03 FX4 silver cluster, Black Edge seats & black rear jump seats, Flowmaster super44, toolbox, headache rack "A man is nothing in this world if he doesn't keep his word" |
|
|
|
|
|
#3 |
|
Junior Member
Join Date: Aug 2011
Posts: 3
|
I didn't because mechanic checked it after he rebuilt it and it ran pretty good. It did leak so he had to pull it off again and it ran good afterwards.
Are you thinking maybe he punched a little hole it it? I will get a new one and replace it. Thanks, Buddy |
|
|
|
|
|
#4 |
|
Rangerholic!!
|
Yeah I had an old truck with that issue, seemed like no matter what we did the carb never seated right and would come loose, popping the gasket every 3 months
__________________
2001 XLT Supercab Stepside! 4" Superlift, 3" PA Body lift, 33X12.5X15 Goodyear Wrangler Silent Armor on Mickey Thompson Classics. 08 power side mirrors, 08 fender badges, Hellas behind the grille, Herculined bed, Vent visors, shorty antennae, modified radio bezel with 2 OEM fog switches & custom paint, mustang dome light, Explorer OHC, 03 FX4 silver cluster, Black Edge seats & black rear jump seats, Flowmaster super44, toolbox, headache rack "A man is nothing in this world if he doesn't keep his word" |
|
|
|
|
|
#5 |
|
Junior Member
Join Date: Aug 2011
Posts: 3
|
Ok,
I will do that. What did you end up doing? LOL Thanks, Buddy |
|
|
|
|
|
#6 |
|
Rangerholic!!
|
I ended up selling it lol!! Try looking into after market carbs instead of the OEM ones, you may get a good fix using them
__________________
2001 XLT Supercab Stepside! 4" Superlift, 3" PA Body lift, 33X12.5X15 Goodyear Wrangler Silent Armor on Mickey Thompson Classics. 08 power side mirrors, 08 fender badges, Hellas behind the grille, Herculined bed, Vent visors, shorty antennae, modified radio bezel with 2 OEM fog switches & custom paint, mustang dome light, Explorer OHC, 03 FX4 silver cluster, Black Edge seats & black rear jump seats, Flowmaster super44, toolbox, headache rack "A man is nothing in this world if he doesn't keep his word" |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1983 Ford Ranger | rf820563 | 1983 - 1988 Ford Ranger | 4 | 05-03-2012 08:28 PM |
| the single life. | Demon-FX4 | Off-Topic | 8 | 02-11-2011 05:12 PM |
| 1983 Ranger Diesel | kdtrucknut | Trades & Sales | 6 | 08-30-2010 10:19 PM |
| Need to find 1983 Pics | ChrisLang | 1983 - 1988 Ford Ranger | 1 | 09-25-2009 10:01 PM |